Panasonic ICX Manual

68

ICX (International), issued March/1998

ICX-35-700

Chapter 3. System Features

Section 700 - Operation

•

Call Forward ID Code for Voice Mail

•

CLI/DDI ID Code for Voice Mail

•

High Priority Message Waiting

•

Message Key ID Code

This feature allows the ICX to send an answer signal to third-party Voice Mail systems.

Without this feature a third-party Voice Mail cannot receive a signal indicating that an ICX extension 
has answered. In other words, to determine that the extension has answered, the Voice Mail system 
would have to wait until the extension stops receiving ringback tone. As a result, waiting for the 
ringback to stop often delays connection times for calls from Voice Mail to extensions. By sending an 
answer signal, this feature provides quicker response time between the ICX and the Voice Mail 
system.

•

AEC Port

•

The digits used for the answer signal code are determined by the requirements of the Voice Mail 
system.

•

The answer code may be up to 4 characters and consist of the characters 0 - 9, *, #, and pause.

•

If the called extension does not answer and is forwarded to Voice Mail, the ICX sends a Call 
Forward ID code back to the Voice Mail system.

•

During transmission of the answer signal code, other DTMF digits and functions from the ICX 
extension are ignored.

•

The Voice Mail port must be assigned as a Voice Mail port connection.

•

The DTMF pattern is set as pattern 2.

Call Forward ID Code for Voice Mail allows you to call forward to a third-party Voice Mail system. 
The ID Code sends the digits that are required by the Voice Mail to identify the System extension. 

1.   Go offhook or press ON/OFF key.

2.   Dial the Call Forward ID Code (default = 715 [UK/HK or 

715# [Taiwan, Malaysia, Indonesia]).

 displays

3.   Enter the ID code required by voice mail (see your voice 

mail manual). Usually this is the extension number.

4.   Press the HOLD key.

 displays

5.   Go onhook or press ON/OFF key.