Panasonic ICX Manual

Descargar
Página de 91
26
ICX (International) issued October 2000
ICX-50-200
      Chapter 2 - System Hardware
Section 200 - General Description      
Analog Proprietary Extension Card (APEC/8) (VB-44660UK) UK only
The APEC/8 card is an interface card for SBS or VB-9 / A-series proprietary key telephones. A 
maximum of eight (8) extensions can be connected to each APEC/8 card.
The APEC/8 card is mounted in a flexible slot. This card accommodates 8-extensions. The 
connection is 4-wires to each extension.
Primary Rate Interface Card (S-point)-PRI (VB-44540)
Same card as T-point.
One-Line SLT Card (VB-43702UK/HK)
Analog Single Line device can be connected to DEC card through this interface card.
OPTIONS
MFR Card (VB-44110)
The Multi-Frequency Receiver (MFR) card accepts dialled DTMF tones and determines the dialled 
digits. Each card contains 8 receiver circuits. 
This card can be installed in either an option slot or any flexible slot. A maximum of one card can be 
installed in a cabinet, with up to 6 cards in a fully configured system.
8-Party Conference Card (VB-44120)
This card provides a set of 8-party conference circuit. (These are in addition to the 3-party conference 
circuits built into the CPC-96, TSW-288 and TSW-576.)
This card is installed in a flexible slot. A maximum of one card can be installed in a cabinet, with up to 
6 cards in a fully configured system.
Built-In ACD Card (VB-44140)
This card, combined with the Voice Processor Unit card (4 circuits) (VB-44160), provides simplified 
Automatic Call Distribution functions. MIS (Management Information System) reports can be output 
from the RS232C port of the ACD card. The reports can be printed out by connecting a printer to the 
RS232C port. However, a PC and printer cannot be simultaneously connected to the RS232C (the 
RS232C cable must be used exclusively for one connection).
Only one Built-In ACD can be installed in a cabinet. A maximum of two Built-In ACDs can be installed 
in a system.
Built-In Voice Mail and Built-In ACD cannot be installed in the same cabinet, since they use the same 
flexible slots.
Built-In Voice Mail Voice Storage Card (VB-44170)
This is one of two cards required for Built-In Voice Mail. One or two Voice Processing Cards (VB-
44160 for 4 circuits; or VB-44150 for 8 circuits) are also required for Built-In Voice Mail.
The Voice Mail Voice Storage Card provides most of the functions of Built-In Voice Mail, including 
hard disk storage of the voice data.
Only one Built-In Voice Mail can be installed in a single cabinet. A maximum of four Built-In Voice 
Mails can be installed in a fully configured system.