Panasonic ICX Manual
ICX-50-200
ICX (International) issued October 2000
69
Section 200 - General Description
Chapter 4 - Station Features
Station Feature
Notes
Direct CO Line Answer
Users can select a specific trunk to answer an incoming call.
Directory Number Keys
for handling multiple calls simultaneously on the same phone;
up to 3 PDNs and 3 NPDNs per phone (plus a direct call
ringing in on the “EXT” LED)
up to 3 PDNs and 3 NPDNs per phone (plus a direct call
ringing in on the “EXT” LED)
DSS/72 (Direct Station Select/72-key) Module can be used with any digital station phone
Directory Display & Dial
Extension, PSD, SSD directories
Display
call status, called party, calling party, date/time
Distinctive Ringing
for individual CO lines and stations
Do Not Disturb
set/clear on own ext. or another ext.
DP-to-DTMF Signal Conversion
Dial-pulse signaling can be switched to DTMF, either manually
or automatically.
DSS/BLF Keys
4 modes for representing another ext.
Dual-Color LEDs
for easier detection of call status/priority
Extension Directory
Users can toggle through a displayed Directory of extensions,
and press a soft key to select & call the extension.
EM/24 (Extension Module/24-Key)
attachable to any keyphone; provides 24 extra FF-keys
Flash
for toggling between 2 calls on an SLT phone, or seizing
another trunk line without hanging up
another trunk line without hanging up
Flexible Feature Keys
with dual-colored LEDs; can program executable codes for
one-touch feature access
one-touch feature access
Floating Park Hold and Retrieve
Anyone can pick up a call on Floating Hold.
Hands-Free Answerback
voice calling; intercom calls are established through the
phone’s speaker (don’t have to lift handset)
phone’s speaker (don’t have to lift handset)
Hands-Free Operation
Press ON/OFF to put a call on speaker, then hang up and
conduct the call over the speaker.
conduct the call over the speaker.
Headset Operation
user-activated; automatic answer; dial-tone muting
Hold
Brokers, Exclusive, Floating, System
Hot Dial Pad
dial without lifting handset
Hot Line
lift handset (no dialing) - the phone automatically dials a pre-
programmed number
programmed number
Interactive Screens
(available on large-display phones only)
Intercom Calling
Tone, Voice
Key Bank Hold
on DSS/72s
Line Appearances
the same trunk line “appears” (via FF-key) on multiple phones
MCO Line Preference
press ON/OFF to seize an MCO trunk
MCO Trunk Access
access an MCO trunk group to make an outside call; the
system decides which trunk in the group will be used
system decides which trunk in the group will be used
Meet-Me Answer
answer an intercom page from any phone
Message Waiting/Callback
send a Message-Waiting signal to another phone; dial a code
to automatically callback the Message-Waiting sender
Mute
block audio to the outside party (Tone Calling only)
Name Assignments
Extension, Trunk, SSD, PSD, DID/DNIS, Extension Index,
SSD Index
SSD Index