Panasonic ICX Manual
Section 700 - Operation
Chapter 3. System Features
ICX-45-700
ICX (International) issued June 2000
37
While in a Night mode (generally used at night or any time when your office is closed), incoming
calls can ring at selected extensions (e.g., a night watchman’s extension or an extension connected to
an answering machine). Outbound calls can be restricted to certain phones. Calls can be directed to a
night-time attendant group instead of the normal daytime attendant group.
calls can ring at selected extensions (e.g., a night watchman’s extension or an extension connected to
an answering machine). Outbound calls can be restricted to certain phones. Calls can be directed to a
night-time attendant group instead of the normal daytime attendant group.
The System provides one Night mode for night call handling. However, there are three night feature
access codes (Night, Night 1, and Night 2). These three codes may be used to provide different two-
way Voice Mail messages (i.e., Night may select one message, Night 1 may select a different
message, and Night 2 may select a third message.)
access codes (Night, Night 1, and Night 2). These three codes may be used to provide different two-
way Voice Mail messages (i.e., Night may select one message, Night 1 may select a different
message, and Night 2 may select a third message.)
Typically, the Day mode is used for normal call processing of outside calls, TRS (Call Barring) calls,
and attendant calls. The second day mode (Day 2) may be used for alternative call handling such as
during a lunch break, etc.
and attendant calls. The second day mode (Day 2) may be used for alternative call handling such as
during a lunch break, etc.
There are two ways to change day/night service modes:
•
Manually
•
Automatically
The following table lists the impact on TRS (Call Barring), Ringing, Attendant, and Built-in Voice
Mail in the various system modes:
Mail in the various system modes:
Table 7.
System Mode Impact on TRS (Call Barring), Ringing, Attendant, and Built-in Voice Mail
Manual Day/Night Mode
You can manually change the System mode to Day 1, Day 2, Night, Night 2, or Night 3 mode by
either entering the correct dial code or by pressing the appropriately programmed FF key.
either entering the correct dial code or by pressing the appropriately programmed FF key.
When using manual mode, the System may be configured to either use MCO tenant Day/Night modes
or system-wide Day/Night mode.
or system-wide Day/Night mode.
SYSTEM
MODE
TRS (Call Barring)
RING
ATTENDANT
BUILT-IN
VOICE MAIL
VOICE MAIL
Day 1
Day TRS Mode
Day 1 Ring Pattern
Day 1 Attend. Group
Day 1 Message
Day 2
Day TRS Mode
(Same for Day 1 and
Day 2)
(Same for Day 1 and
Day 2)
Day 2 Ring Pattern
Day 2 Attend. Group
Handling
Handling
Day 2 Message
Night
Night TRS Mode
(Same for Night 1,
and 2)
(Same for Night 1,
and 2)
Night Ring Pattern
(Same for Night 1,
and 2)
(Same for Night 1,
and 2)
Night Attend. Group
(Same for Night 1,
and 2)
(Same for Night 1,
and 2)
Night Message
Night 1
Night TRS Mode
(Same for Night 1,
and 2)
(Same for Night 1,
and 2)
Night Ring Pattern
(Same for Night 1,
and 2)
(Same for Night 1,
and 2)
Night Attend. Group
(Same for Night 1,
and 2)
(Same for Night 1,
and 2)
Night 1 Message
Night 2
Night TRS Mode
(Same for Night 1,
and 2)
(Same for Night 1,
and 2)
Night Ring Pattern
(Same for Night 1,
and 2)
(Same for Night 1,
and 2)
Night Attend. Group
(Same for Night 1,
and 2)
(Same for Night 1,
and 2)
Night 2 Message