Panasonic ICX Manual
50
ICX (International) issued June 2000
ICX-45-700
Chapter 3. System Features
Section 700 - Operation
Considerations
•
Name Assignments
Description
Names may be assigned to the following:
•
Extensions
•
Trunks
•
Direct Dial Inwards (DDIs)
•
Personal Speed Dials (PSDs)
•
Systems Speed Dials (SSDs)
Trunk names and DDI names must be assigned in dealer programming mode. Extension names and
Speed Dial names may be assigned from a display telephone.
Speed Dial names may be assigned from a display telephone.
This feature does not require the use of a DSS/72 console or entering the programming mode.
Extension Name Assignments
Extension names can be up to 10 characters in length. (Assignment of extension names must be
allowed in the Extension COS.)
allowed in the Extension COS.)
Operation
To set extension names using a large-display or small-display phone:
Important: A license may be required from the Society of Composers, Authors,
and Publishers (ASCAP) or similar organizations to transmit radio or recorded
music through the MOH feature. Panasonic, its distributors, and affiliates
assume no liability should users of Panasonic equipment fail to obtain such a
license.
and Publishers (ASCAP) or similar organizations to transmit radio or recorded
music through the MOH feature. Panasonic, its distributors, and affiliates
assume no liability should users of Panasonic equipment fail to obtain such a
license.
Action
Result
1. Lift the handset or press the ON/OFF key.
Intercom dial tone
2. Press the PROG key.
3. Press the * key.
4. Enter 2 for the Extension Name Assignment mode.
EXT
NO.=>
EXT NAME
displays
5. Enter the extension number.
6. Press the HOLD key.
XXX
A B C D E F XXX
displays (where
XXX = extension number)
7. Press the FL/R key to clear the existing data.
A B C D E F XXX
displays (where
XXX = extension number)