CXtec NEW COMPATIBLE GIG SX MMF MINI GBIC WITH LC CONNECTORS AND LIFETIME WARRANTY Guia De Especificaciones
Chapter 2 Installing GBICs 39
Installing SFP and XFP Transceivers and GBICs
1000BASE-ZX specifications
The Model 1000BASE-ZX GBIC provides Gigabit Ethernet connectivity using
SC duplex single-mode fiber connectors. High-performance optical transceivers
enable Gigabit Ethernet link distances up to 70 km over single-mode fiber cable.
The ports operate in full-duplex mode only.
SC duplex single-mode fiber connectors. High-performance optical transceivers
enable Gigabit Ethernet link distances up to 70 km over single-mode fiber cable.
The ports operate in full-duplex mode only.
describes standards, connectors, cabling, and distance for the Model
1000BASE-ZX GBIC.
Distance
Up to 50 km using single-mode fiber cable,
depending on the quality of the fiber
depending on the quality of the fiber
Optical budget
17 dB
Laser Transmitter Characteristics
Wavelength
1550 ± 10 nm
Maximum spectral width
0.2 nm
Maximum launch power
0 dBm or 1.0 mW
Minimum launch power into
fiber
fiber
-5 dBm or 0.3 mW
Distance
50 km
Receiver Characteristics
Wavelength
1200 to 1620 nm
Minimum receiver sensitivity -22 dBm
Maximum input power
-3 dBm
Note:
Nortel recommends that you use an in-line attenuator for shorter link
distances to avoid overloading the receiver
.
Table 17 1000BASE-ZX GBIC specifications
Type
Specifications
Standards
Conforms to the following standards:
802.3z, Ethernet full duplex
Connectors
SC duplex single-mode fiber optic connector
Table 16 1000BASE-XD GBIC specifications (continued)
Type
Specifications