CXtec NEW COMPATIBLE GIG SX MMF MINI GBIC WITH LC CONNECTORS AND LIFETIME WARRANTY Guia De Especificaciones
58 Chapter 3 Installing XFPs
318034-D Rev 00
10GBASE-ZR/ZW specifications
lists the transmit specifications for the 10GBASE-ZR/ZW XFP.
6 Stressed eye jitter is a test condition for measuring stressed receiver sensitivity. It is not
a required characteristic of the receiver.
Table 30 10GBASE-ZR/ZW XFP transmit specifications
Item
Specification
Signaling speed (nominal)
10GBASE-ZR 10.3125 GBd, 10GBASE-ZW 9.95328 GBd
Signaling speed variation
from nominal (max)
from nominal (max)
+ or -100 ppm for 10BASE-ZR, + or -20 ppm for
10GBASE-ZW
10GBASE-ZW
Center wavelength (range)
1530-1565 nm
Side Mode Suppression
Ratio (minimum)
Ratio (minimum)
30 dB
Average launch power (max) 4.0 dBm
Average launch power
1
(min)
1 Average launch power (min) is informative and not the principal indicator of signal
strength. A transmitter with launch power below this value cannot be compliant,
however, a value above this does not ensure compliance.
however, a value above this does not ensure compliance.
0 dBm
Optical Modulation
Amplitude
Amplitude
2
(min)
2 Even if the TDP < 1 db, the OMA (min) must exceed this value.
1.25 dBm (ER = 7 dBm)
Average launch power of
OFF transmitter
OFF transmitter
3
(max)
3 Examples of an OFF transmitter are: no power supplied to the PDM, laser shutdown for
safety conditions, activation of a PMD_global_transmit_disable or other optional
transmitter shut down conditions.
transmitter shut down conditions.
Compliant to -30 dBm
Optical path penalty (max)
3.0 dB
Extinction ratio
min 3.5 db EOL, max 7.0 db SOL
RIN
12
OMA (max)
4
4 Relative intensity noise (RIN) measurement is made with a return loss at 21 dB.
-128 dB/Hz
Optical Return Loss
Tolerance (max)
Tolerance (max)
26 dB
Transmitter reflectance
(max)
(max)
-12 dB
Transmitter eye mask
definition {X1, X2, X3, Y1,
Y2, Y3}
definition {X1, X2, X3, Y1,
Y2, Y3}
{0.25,0.40,0.45,0.25,0.28,0.40}