Cisco CATALYST 6509 BUNDLE WITH 1300W AC POWER SUPPLY WITH FAN TRAY Guia De Especificaciones
1-2
Catalyst 6500 Series Switches Installation Guide
OL-5781-04
Chapter 1 Product Overview
Catalyst 6503 Switch
Catalyst 6503 Switch
The Catalyst 6503 switch is a 3-slot horizontal chassis.
lists the features of the Catalyst 6503
switch chassis.
lists the specifications of the Catalyst 6503 switch chassis.
shows
the front view and
shows the rear view of the Catalyst 6503 switch.
Table 1-1
Catalyst 6503 Switch Features
Feature
Description
Chassis
•
Three horizontal slots. Slots are numbered from 1 (top) to 3 (bottom).
Supervisor Engine
•
Supports Supervisor Engine 1, Supervisor Engine 2, Supervisor
Engine 32, and Supervisor Engine 720.
Engine 32, and Supervisor Engine 720.
–
Supervisor engines are installed in slot 1 and slot 2.
–
Using a Supervisor Engine 32 or a Supervisor Engine 720 requires
that you install the optional high-speed fan tray.
that you install the optional high-speed fan tray.
•
The uplink ports are fully functional on the redundant supervisor engine
in standby mode.
in standby mode.
Note
Redundant supervisor engines must be configured identically.
Modules
•
Supports up to two Catalyst 6500 series modules.
•
Does not support the WS-C6500-SFM and WS-X6500-SFM2 Switch
Fabric Modules.
Fabric Modules.
•
Does not support the WS-X67xx modules.
•
Some Catalyst 6500 series modules may:
–
Not be supported
–
Require that you install a Supervisor Engine 720
–
Have chassis slot restrictions
–
Require a specific software release level
Check your software release notes for specific information.
Backplane Bandwidth
•
32 GBps shared bus.
•
720 GBps switch fabric.
Clock and VTT modules
•
One replaceable clock module (CLK-7600=) provides clocking signals
to the EOBC channel and the switching bus.
to the EOBC channel and the switching bus.
•
Non-replaceable voltage termination (VTT) module provides reference
voltage for bus signals.
voltage for bus signals.