Sonos PLAY:1 Manual De Propietario
Product Guide
4
Selecting a Location
You can locate a SONOS PLAY:1 just about anywhere. For maximum enjoyment, we have a few guidelines:
• The PLAY:1 is designed to work well even when placed next to a wall or other surface. For optimum performance,
maintaining more than 1 inch (2.5 cm) clearance around the back of the unit is recommended.
• Care should be taken if placing the PLAY:1 close to an older CRT (cathode ray tube) television. If you notice any
discoloration or distortion of your picture quality, simply move the PLAY:1 further from the television.
• The PLAY:1 is humidity-resistant so you can use it in the bathroom; however it is not water-resistant so don’t position
it near water or leave it outside during a rain storm.
Wall Mounting
The SONOS PLAY:1 has a 1/4 inch (6.75mm) integrated, threaded (20 threads per inch) mounting hole. If desired, you can
easily wall mount your PLAY:1 using a suitable mounting bracket (not included). Simply choose a location that’s close to an
electrical outlet (power cord length is 2m), taking care to avoid heat, steam, dripping water or hidden wiring, and follow the
instructions included with the wall mount kit.
easily wall mount your PLAY:1 using a suitable mounting bracket (not included). Simply choose a location that’s close to an
electrical outlet (power cord length is 2m), taking care to avoid heat, steam, dripping water or hidden wiring, and follow the
instructions included with the wall mount kit.
Adding to an Existing Sonos System
Once you’ve got your Sonos music system set up, you can easily add more Sonos components any time (up to 32 rooms).
1.
Select a location for your PLAY:1 (see "Selecting a Location" above for optimal placement guidelines.)
2.
Attach the power cord to the PLAY:1 and apply power.
Be sure to push the power cord firmly into the bottom of the
PLAY:1 until it is flush with the bottom of the unit.
Threaded mounting hole
1/4 inch (6.75mm) /
1/4 inch (6.75mm) /
20-thread
The PLAY:1 has an integrated mounting hole on the back of the unit so it can be wall-
mounted if desired (mounting bracket not included.) See "Wall Mounting" on page 4 for
more information.
mounted if desired (mounting bracket not included.) See "Wall Mounting" on page 4 for
more information.
Ethernet switch connector
You can use an Ethernet cable (supplied) to connect the PLAY:1 to a router, computer, or
additional network device such as a network-attached storage (NAS) device.
additional network device such as a network-attached storage (NAS) device.
AC power (mains) input
(~100-240 V, 50-60 Hz)
Use the supplied power cord to connect to a power outlet.
Insert the power cord firmly into the PLAY:1 until it is flush with the bottom of the unit.
Note: Be sure the wall mount bracket you purchase will support at least 8lbs. (3.6 kgs) and
has a 1/4 inch (6.75mm) threaded (20 threads per inch) post.
has a 1/4 inch (6.75mm) threaded (20 threads per inch) post.
Note: If you want to make a wired connection, connect a standard Ethernet cable from your
router or another Sonos component (or a live network wall plate if you have built-in wiring) to
an Ethernet switch connection on the back of the new Sonos component.
router or another Sonos component (or a live network wall plate if you have built-in wiring) to
an Ethernet switch connection on the back of the new Sonos component.