Brandmotion FDMC-1220 Manual De Propietario

1220 Instructions 6-26-14.docx

Page 3 of 5

Step 7: Use 7mm Nut Driver to remove 2
screws attached to console.

Step 8: Use 7mm Socket Driver to remove 2
screws attached to instrument panel.

Step 9: Use a Plastic Trim Removal Tool to
remove front console tray.

Step 10: Disconnect power point plug to
remove tray from vehicle. If equipped with
lighting package, light harness needs to be
disconnected as well.

Step 11: Cut out provided template and mark
location for 1/2” hole and the (4) 3/16”
holes.

Step 12: Drill 1/2” hole and 3/16” holes from
the previous marked locations.