Brandmotion FDMC-1220 Manual De Propietario
1220 Instructions 6-26-14.docx
Page 3 of 5
Step 7: Use 7mm Nut Driver to remove 2
screws attached to console.
screws attached to console.
Step 8: Use 7mm Socket Driver to remove 2
screws attached to instrument panel.
screws attached to instrument panel.
Step 9: Use a Plastic Trim Removal Tool to
remove front console tray.
remove front console tray.
Step 10: Disconnect power point plug to
remove tray from vehicle. If equipped with
lighting package, light harness needs to be
disconnected as well.
remove tray from vehicle. If equipped with
lighting package, light harness needs to be
disconnected as well.
Step 11: Cut out provided template and mark
location for 1/2” hole and the (4) 3/16”
holes.
location for 1/2” hole and the (4) 3/16”
holes.
Step 12: Drill 1/2” hole and 3/16” holes from
the previous marked locations.
the previous marked locations.