Brandmotion FDMC-1262 Manual De Propietario
1262 Instructions 3-23-15.doc
Page 3 of 5
Step 6: Using Trim Removal Tool remove rear
console end cap.
console end cap.
Step 7: Drill 1/2” hole through lower armrest bin
side panel 1 ½” below top lip on passenger side of
vehicle.
side panel 1 ½” below top lip on passenger side of
vehicle.
Step 8: Remove rubber bin insert from top of
dash.
dash.
Step 9: Remove 7mm bolt.
Step 10: Using a plastic trim removal tool, remove
window switch panel.
window switch panel.
Step 11: Disconnect harness from window
switches.
switches.