Brandmotion FDMC-1262 Manual De Propietario
1262 Instructions 3-23-15.doc
Page 5 of 5
Step 18: Run Power Harness along console side
panel reward towards armrest bin.
panel reward towards armrest bin.
Step 19: Run harness through ½” hole into
armrest bin.
armrest bin.
Step 20: Connect Power Harness to Charging
Module.
Step 21: Test system. LED light will illuminate
Blue once accessories are on. Once Qi equipped
device is placed on Freedom Charge LED will
illuminate Green and charging begins. *Please
note on some devices syncing may take up to 15
seconds. Coil locations vary on various devices;
move device on mat until LED illuminates green.
Blue once accessories are on. Once Qi equipped
device is placed on Freedom Charge LED will
illuminate Green and charging begins. *Please
note on some devices syncing may take up to 15
seconds. Coil locations vary on various devices;
move device on mat until LED illuminates green.
Step 22: Reassemble vehicle. Follow your
disassembly steps in reverse order, taking care not
to bind the harness wiring when reinstalling trim.
disassembly steps in reverse order, taking care not
to bind the harness wiring when reinstalling trim.
Step 23: Place removable consumer product label
on center of mat.
on center of mat.