Brandmotion FDMC-1280 Manual De Propietario
1280Instructions1-22-15.doc Page
2
of
3
Step 1: Use a Phillips Screwdriver to remove
screw on side of console to gain access to the
12V ignition power point.
screw on side of console to gain access to the
12V ignition power point.
Step 2: Remove the rubber liner from bin
forward of shifter.
forward of shifter.
Step 3: Use provided template to mark 1/2"
drill location.
drill location.
Step 4: Drill 1/2” hole in previous marked
location.
location.
Step 5: Remove backing of adhesive pad.