Nikon Coolpix W300 Manual De Propietario
97
Recording the Location Data on the Image
Set Time zone and date (
A162) correctly before using the location data functions.
1
Set Use built-in location data to On.
• After the settings are complete, press the d
button or shutter-release button to exit the menu.
• To receive signals easily, operate in an open-air
area.
2
Check the location data reception on
the shooting screen.
the shooting screen.
• n or o: Signals are being received from four or
more satellites, or from three satellites, and
location data is being obtained. The location data
is recorded on the image.
location data is being obtained. The location data
is recorded on the image.
• z: Signals are being received, but location data
cannot be obtained. The location data is not
recorded on the image.
recorded on the image.
• y: Signals cannot be received from the satellites,
and location data cannot be obtained. The location data is not recorded on the
image.
image.
3
Shoot images while positioning is being performed.
• The location data is recorded on shot images.
• z is displayed on images with recorded location data in the camera’s playback
screen (
A7).
• The recorded location data can be checked on a map by using ViewNX-i after
transferring images to a computer (
Recording the Location Data on the Image
Press the
d button M z menu icon M Location data options M k button
Use built-in location data
On
Off
40
10
0
-10
30
20
25m 0s
25m 0s
500
500
15m
15m
1010hPa
1010hPa
Location data reception