ClearView HD2-PTZ-4 Manual De Propietario
8
INITIALIZATION INFORMATION
ADDR INFORMATION
SET NORTH
LANGUAGE :ENGLISH
VIDEO OUTPUT : HD
FACTORY DEFAULT
BACK
EXIT
ADDR INFORMATION
SET NORTH
LANGUAGE :ENGLISH
VIDEO OUTPUT : HD
FACTORY DEFAULT
BACK
EXIT
In the speed dome main menu, you can use the left/right button on the keyboard or in the speed dome
terminal menu to configure the system menu. Before setup, please move the cursor to the current item
you want to configure.
In main menu, please click confirm button to go to the sub menu or use left/right key to configure
In main menu, please click confirm button to go to the sub menu or use left/right key to configure
setup.
Use up/down button to select back option and then click confirm button to go back to the previous
menu.
Use up/down button to select exit option and then click confirm button to log out system menu.
All setup here will not lose when encounter power failure.
All setup here will not lose when encounter power failure.
3.4.1 System Information
Figure 3-3 System setting
INITIALIZATION INFORMATION: Move the cursor to INITIALIZATION INFORMATION and then
click confirm button to go to the third submenu.
ADDR INFORMATION: Move the cursor to ADDR INFORMATION and then click confirm button to
go to the third submenu.
SET NORTH: Set dome benchmark direction so that you can know the angel between the
benchmark and then current location. Please move the cursor to the option and then click confirm
button until you see O.K. Now you have set north direction.
LANGUAGE: The dome menu language. There are several languages for you to select. Please use
the left/right button on the keyboard or in the speed dome terminal menu to set.
VIDEO OUTPUT: It is to set the video output mode of the speed dome, click left and right button on
the keyboard or the left and right button controlled by the speed dome control terminal to set, you
can select HD, SD and self-adaption. When self-adaptation function is enabled, the camera can
switch to corresponding HD video output or SD video output according to the back-end storage
device types (HD storage, SD storage) and self-adaptation.
Note:
After the switch of menu HD/SD configuration, it needs to reboot the system to make it valid, it may
cause abnormity by cutting off power directly.
It needs the back-end storage device to support HD/SD self-adaptation function to make it valid.
FACTORY DEFAULT: Restore dome factory default setup. Please move the cursor to the option
and then click confirm button until you see O.K. Now you can see the IP dome begin rebooting to
restore factory default setup.
RESTART: Reboot the speed dome.
BACK: Go back to the previous menu.
EXIT: Log out system menu.
BACK: Go back to the previous menu.
EXIT: Log out system menu.
3.4.1.1
System Information