Sony HT-CT290 Manual De Propietario

26

US

 Enable the Control for HDMI 

function on the devices connected 
to the system. For details, refer to 
the operating instructions of your 
device.

 The type and number of devices 

that can be controlled by the 
Control for HDMI function is 
restricted by the HDMI CEC standard 
as follows:
• Recording devices (Blu-ray Disc 

recorder, DVD recorder, etc.): up 
to 3 devices

• Playback devices (Blu-ray Disc 

Player, DVD player, etc.): up to 
3 devices

• Tuner-related devices: up to 

4 devices

• Audio system (receiver/

headphone): up to 1 device (used 
by this system)

If all input indicators and sound effect 
indicators flash quickly (PROTECT 
mode).
 Press  to turn off the system. After 

the display turns off, disconnect the 
AC power cord (mains lead) then 
check that nothing is blocking the 
ventilation holes of the Bar Speaker.

All input indicators and sound effect 
indicators do not light up.
 The indicators are off. Hold down 

BACK for 5 seconds to turn on the 
indicators.

Sensors of the TV do not work properly.
 The Bar Speaker may block some 

sensors (such as the brightness 
sensor), the remote control receiver 
of your TV, or the emitter for 3D 
glasses (infrared transmission) of a 
3D TV that supports the infrared 3D 
glass system or the wireless 
communication. Move the Bar 
Speaker away from the TV within a 
range that allow those parts to 
operate properly. For the locations 
of the sensors and remote control 
receiver, refer to the operating 
instructions supplied with the TV.

 does not work.

 The system may be in demo mode. 

To cancel demo mode, perform 
“Reset” (page 26).

If the system still does not operate 
properly, reset the system as follows.
Be sure to use the touch keys on the Bar 
Speaker to perform this operation.

1

Hold down – (volume down) and 
 simultaneously for 5 seconds.
All LED indicators flash three times, 
then light off.
The settings of the menu and sound 
fields, etc. return to their initial 
status.

2

3

 to turn on the 

4