Thunder Tiger Corp. TT-FHM2P4G-A14 Manual De Usuario

Be sure the steering trim on the transmitter is at the neutral position before you are trying to make an 

adjustment.

When you install a servo, always check to be sure the servo is at its neutral position.

●

 

Changing the trim can affect the overall settings. When adjustments are made with this trim, it is 

recommended to re-check your installation for maximum servo travel.

If it takes most of your trim movement to get a servo to the neutral position, re-position the servo horn or 

servo saver on the servo and inspect your linkage installation.

●

 

By turning the Steering Trim knob clockwise or counter-clockwise, 

the steering neutral can be adjusted as needed.

It is sometimes necessary or convenient to reverse the output 

direction of the servo. The direction of the rotation for each 

individual servo can be changed by simply flipping the reversing 

switch that corresponds to the channel number on the receiver 

where the servo is plugged in. Under normal circumstances, 

Ch1 is steering, Ch2 is throttle. Using the reversing switches as 

needed.

iFHss : To back-ward compatible to our TRS401ss reciever.

iFHss

+

: You can switch to fast data mode and get a fast and reliable 

control to your R/C model, we recommand to use this mode 

if your TRS402ss reciever also supports this mode.

No Function

*for Cougar P2

*for Cougar P3