Binatone T100T Manual De Usuario
10
Getting Started
2.2
Attach the Adjustable Strap to the Pet Collar Unit
IMPORTANT
Power off the Pet Collar Unit before attaching the strap.
Power off the Pet Collar Unit before attaching the strap.
1.
Set the Pet Collar Unit facing down with the Metal Contacts facing up.
2.
With the front side of the buckle facing down, thread the strap through the
first slot, moving it towards the second slot.
first slot, moving it towards the second slot.
3.
Continue to thread through the second slot.
2.3
Charging the Pet Collar Unit
1.
Connect the small plug of the power adapter to the Pet Collar Unit and the
other end into the electrical outlet.
other end into the electrical outlet.
2.
The Charging LED will light up in blue to indicate charging.
NOTE
Only use the enclosed power adapter (6V DC / 450mA).
Only use the enclosed power adapter (6V DC / 450mA).
The battery pack will take approximately 16 hours to charge. The Power LED
will light up in red when battery is low. To conserve battery life, press and hold
the POWER KEY
to power off the Pet Collar Unit when it is not in use.
Slot
Slot
Metal Contacts