Binatone T100T Manual De Usuario
Getting Started
9
ENGLISH
2. Getting Started
2.1
Remote Control Unit Battery Installation
The Remote Control Unit uses 2x AAA-sized alkaline batteries.
1.
Use a small cross-head or flat end screwdriver to unscrew the battery
compartment cover as shown above.
compartment cover as shown above.
2.
Fit the batteries into the compartment in the correct polarity as shown
below.
below.
3.
Close the battery compartment cover and gently tighten the screw in a
clockwise direction using a small cross-head or flat end screwdriver.
clockwise direction using a small cross-head or flat end screwdriver.
4.
Press and hold the POWER KEY
to power the Remote Control Unit
on or off.
Small cross-head
or flat end
screwdriver.
or flat end
screwdriver.
+
+