Binatone T100T Manual De Usuario
16
Training Your Dog with the Remote Training System
4. Training Your Dog with the Remote Training
System
System
Whether you’re hoping to provide your dog more freedom at the park or trying
to solve frustrating behavior problems, your new Remote Training System
provides a quick and easy training solution. To get the most from your Remote
Training System, carefully follow these instructions.
to solve frustrating behavior problems, your new Remote Training System
provides a quick and easy training solution. To get the most from your Remote
Training System, carefully follow these instructions.
Your Remote Training System provides 15 levels of static correction from none
(LEVEL 0) to very strong (LEVEL 15). Every dog is different. You can’t
determine the right correction level for your dog by their size or breed. Dog
temperaments, sensitivity and personalities are all different, so you will need to
conduct a little experiment to see which level is right for your dog.
(LEVEL 0) to very strong (LEVEL 15). Every dog is different. You can’t
determine the right correction level for your dog by their size or breed. Dog
temperaments, sensitivity and personalities are all different, so you will need to
conduct a little experiment to see which level is right for your dog.
NOTE
LEVEL 0 does not deliver any static correction, only vibration and beep tone.
LEVEL 0 does not deliver any static correction, only vibration and beep tone.
To conserve battery life, the Remote Control Unit will automatically shut down
after 30 minutes of inactivity. Press and hold the POWER KEY
after 30 minutes of inactivity. Press and hold the POWER KEY
on the top
of your Remote Control Unit to power it back on.
4.1
Powering On/Off the Remote Control Unit
To power on or off, press and hold the POWER KEY on
the
Remote
Control Unit.
4.2
Select a Pet Collar Unit (if you have 2 or more Pet Collar
Units)
Units)
Press the OK KEY
on the Remote Control Unit until the Pet Collar Unit (1 to
4) to which you wish to send remote commands is displayed.
indicates that collar number 3 is selected.
4.3
Deliver Static Correction
1.
Press and hold the STATIC CORRECTION KEY
on the Remote
Control Unit.
2.
Press
to increase the level of correction or press
to decrease.
The number beside the
symbol on the screen indicates the current