Binatone T100T Manual De Usuario

Descargar
Página de 33
Training Your Dog with the Remote Training System
17
ENGLISH
level of correction.
 indicates that the current level of correction is 8.
3.
The Indicator LED on the Pet Collar Unit flashes alternately in green and red 
when delivering static correction.
NOTE
The maximum duration you can press the 
STATIC CORRECTION KEY 
  
to deliver static correction to your dog continuously is 60 seconds. This is 
followed by a 30 seconds "rest" period. You can press the 
STATIC 
CORRECTION KEY
 again after the "rest" period.
4.4
Determine the TRAINING LEVEL for your dog
TRAINING LEVEL is the level you use to discourage your dog’s behavior, such as 
getting on the couch, towards a more acceptable behavior, such as lying on the 
ground.
With the Pet Collar Unit properly fitted on your dog and powered on, start on 
level 1. This level is extremely low and most dogs will feel very little, if anything 
at all. The number beside 
 
on your Remote Control Unit indicates the current 
Static Correction Level.
1.
Press and hold the STATIC CORRECTION KEY 
 on the Remote 
Control Unit. 
2.
Look for signs that your dog is feeling the static correction, such as ears 
twitching, looking up or down or a quick shake of the head. 
3.
If nothing happens, press 
to go to level 2 and try again. 
4.
When you see that your dog is feeling the static correction, this is your 
dog’s TRAINING LEVEL. 
4.5
When to Increase Level of Static Correction 
When you are trying to change your dog’s behavior around a heavy distraction 
where your dog is too excited to feel the TRAINING LEVEL described above, 
such as jumping on a visitor at the door, you will need to increase the correction 
level 2 or 3 levels higher than the TRAINING LEVEL. If the TRAINING LEVEL you 
established was level 3, then you will need to increase it to level 5 to have your