Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Binatone
  4. T100T
  5. Manual De Usuario

Binatone T100T Manual De Usuario

Descargar
Página de 33
Training Tips
19
ENGLISH
5. Training Tips
Use only the static correction level necessary to get the desired response. 
•  In most circumstances, your dog should never yelp in discomfort or pain.
•  Reserve the highest settings for critical, dangerous or life threatening 
behaviors such as running towards a traffic. 
After stopping an inappropriate behavior, immediately direct your dog to an 
appropriate behavior followed by a reward.
•  After you have pressed the STATIC CORRECTION KEY 
 to stop an 
inappropriate behavior, such as jumping on a visitor, immediately direct your 
dog to a more appropriate behavior such as “Get your ball!” 
•  Or, if you have taught your dog basic commands, you can command your 
dog to sit and then provide a treat or verbal praise. 
•  The rationale behind this is to direct your dog to an acceptable behavior and 
provide a reward for your dog after being corrected for an inappropriate 
behavior. 
Teaching your dog the "Come" command.
1.
Put a separate collar on your dog’s neck above the Pet Collar Unit, without 
adding pressure to the Metal Contacts on the Pet Collar Unit. 
2.
Attach a long leash to the separate collar. 
3.
Press and hold the POWER KEY 
 to power on the Pet Collar Unit.
4.
When your dog is distracted and looking away from you, press and hold 
the  STATIC CORRECTION KEY 
 on your Remote Control Unit (at 
your dog’s TRAINING LEVEL). The number beside 
 
on your Remote 
Control Unit indicates the current Static Correction Level. See “Determine 
the TRAINING LEVEL for your dog” on page 17. 
5.
Jog backwards. 
6.
As soon as your dog turns to follow you, release the STATIC 
CORRECTION KEY 
 and bring the dog to you. 
7.
Provide a treat reward and praise. Repeat these steps until your dog is 
returning to you unprompted with the leash pull. 
8.
Now, your dog will know how to respond to the collar’s static correction.