Godex International Co. Ltd. 6PDL7 Manual De Usuario
2. Printer Installation
DuraLabel 7000 is a Thermal Transfer mode printer. When printing, ribbon must be installed to
transfer the print contents onto the media. It supports RFID tag reading function that can detect
the type of label used for printing. To ensure the best quality of printout, please use the
designated label for printing.
transfer the print contents onto the media. It supports RFID tag reading function that can detect
the type of label used for printing. To ensure the best quality of printout, please use the
designated label for printing.
【
Note
】
The printer will stop the printing procedure when a non-designated label has been
detected to be used for printing.
2-1. Label Installation
1.
Place the printer on a horizontal
surface, and open the top cover.
surface, and open the top cover.
2.
Follow the sequence and
direction as the figure shows, pull
the Print Head Lever out and flip it
upward to the right.
the Print Head Lever out and flip it
upward to the right.
1
2
3.
Press the Cutter Hook to open the
cutter.
cutter.
DuraLabel 7000 User’s Manual
13