Godex International Co. Ltd. 6PDL7 Manual De Usuario
4.
Pull the Label Alignment Guide to
the direction as the blue arrow 1
indicates.
the direction as the blue arrow 1
indicates.
5.
Flip the Label Supply Guide
upward as the blue arrow 2
indicates.
upward as the blue arrow 2
indicates.
2
1
5.
Place the label roll onto the Label
Roll Bar and align the label to
printer’s inner wall. (To avoid the
damage of media, please do not
squeeze the label roll too hard.)
Roll Bar and align the label to
printer’s inner wall. (To avoid the
damage of media, please do not
squeeze the label roll too hard.)
6.
Pull the Label Alignment Guide
back and make it fit the edge of
label roll.
back and make it fit the edge of
label roll.
【
Note
】
Please always hold the bottom of the
Label Alignment Guide when moving.
Label Alignment Guide when moving.
2
1
7.
Follow the direction as the figure
shows to feed the label.
shows to feed the label.
8.
Put the label under the Moveable
Sensor and stretch it to the
Tear-Off Bar.
Sensor and stretch it to the
Tear-Off Bar.
【
Note
】
Moveable Sensor should be aligned to
the position of label gap, black mark
and punch hole. You can adjust the
position with Moveable Sensor Lever.
the position of label gap, black mark
and punch hole. You can adjust the
position with Moveable Sensor Lever.
1
2
3
DuraLabel 7000 User’s Manual
14