Bently Nevada Inc. 18531001 Manual De Usuario
Section 5 - Installing Hardware
33
wSIMs and Repeaters are designed for Zone 0
hazardous area approvals. Check with your Bently
Nevada representative to find out which approvals
are available for your region.
hazardous area approvals. Check with your Bently
Nevada representative to find out which approvals
are available for your region.
5.3.1 Choosing a Mounting Location
Mount the wSIMs in locations such that:
The field wiring can be routed between the
transducers and the wSIMs.
transducers and the wSIMs.
The wSIM is installed such that there are 3
other nodes within a 50M to 75M radius
around the node. This will ensure the wSIM
will have multiple paths to communicate to
resulting in highly reliable communications.
other nodes within a 50M to 75M radius
around the node. This will ensure the wSIM
will have multiple paths to communicate to
resulting in highly reliable communications.
The mounting location for wSIMs requires a metal
surface for the magnet mount option or an adequate
substrate for drilling and taping a 12.7-mm (0.5-inch)
hole to permanently mount the hex base mount.
Only use the magnet mount on a ferrous metal
surface.
surface for the magnet mount option or an adequate
substrate for drilling and taping a 12.7-mm (0.5-inch)
hole to permanently mount the hex base mount.
Only use the magnet mount on a ferrous metal
surface.
The wSIM must be mounted such that the cable can
be safely routed and secured to the point the
transducer is mounted. The available cable lengths
for the accelerometer and K-type thermocouple are
2 m, 4 m, and 6 m. There are also optional
Trendmaster cables that can be used with the
accelerometers. The 15 m (49ft) cable (P/N 200152-
15), and 25m (82 ft) cable (P/N 200152-25) must be
used with field termination connector (P/N 162438-
01).
be safely routed and secured to the point the
transducer is mounted. The available cable lengths
for the accelerometer and K-type thermocouple are
2 m, 4 m, and 6 m. There are also optional
Trendmaster cables that can be used with the
accelerometers. The 15 m (49ft) cable (P/N 200152-
15), and 25m (82 ft) cable (P/N 200152-25) must be
used with field termination connector (P/N 162438-
01).