Meru Networks Inc. AP433E Manual De Usuario
6
Meru Access Point Installation Guide
© 2010 Meru Networks, Inc.
Unpack the AP400
Unpack the AP400
The AP400 series has the following model(s) as shown below.
Confirm that the AP400 shipping package contains these items:
AP400
Eight antennas
Wall mounting bracket
Rubber feet
Locking pin
Determine Power Requirements
Power requirements vary, depending on which AP400 radios are deployed and what MIMO mode is used.
See the chart below for supported power sources for different radio configurations.
See the chart below for supported power sources for different radio configurations.
802.af PoE Usage
When using System Director 3.6 (or later) and 802.3af PoE, Meru supports radios set to any MIMO
settings except 3x3 on three radios. This is because three radios set to 3x3 MIMO using an 802.3af
switch may not have enough power if the cable is too long. Shorter cables frequently work, however.
Meru supports:
settings except 3x3 on three radios. This is because three radios set to 3x3 MIMO using an 802.3af
switch may not have enough power if the cable is too long. Shorter cables frequently work, however.
Meru supports:
Model
Radios
AP433e
Three a/b/g/n
Radio 1 MIMO
Radio 2 MIMO
Radio 3 MIMO
802.3af PoE
802.3at PoE
DC Power
2x2
2x2
2x2
2x2
3x3 3x3
3x3
2x2
3x3
3x3
3x3
3x3