Meru Networks Inc. AP433E Manual De Usuario
10
Meru Access Point Installation Guide
© 2010 Meru Networks, Inc.
Install the AP400
Figure 6: AP400 Antennas in Ceiling and Wall Mount Configuration
Do not leave any antenna connectors unterminated. All connectors on the AP must be terminated with
antennas or with 50 ohm Reverse Polarity SMA terminators.
antennas or with 50 ohm Reverse Polarity SMA terminators.
The attached antennas must be the same model; if you replace one antenna with a different type,
replace them all.
replace them all.
Install the Access Point
AP400 ships with a mounting bracket included in the box. This bracket is intended for installation as a
wall-mount; for mounting on a ceiling, no mount is typically required. See the following sections for
more specific details.
wall-mount; for mounting on a ceiling, no mount is typically required. See the following sections for
more specific details.
Mount AP400 Horizontally on a Shelf
When mounting an AP400 horizontally, no mounting bracket is required. Be sure to position the
antennas vertically when an AP400 sits on a surface. In order to ensure that the AP400 does not shift
much, attach the rubber feet provided in the box to the bottom of the AP.
antennas vertically when an AP400 sits on a surface. In order to ensure that the AP400 does not shift
much, attach the rubber feet provided in the box to the bottom of the AP.
Mount AP400 Vertically on a Wall
To mount an AP400 on a wall:
RESE
T
CONSOL
E
G1
USB