Inscape Data Co. AGNVC110W Manual De Usuario
NVC100/110 User’s Manual
25
25
25
25 of
of
of
of 51
51
51
51
- When the network environment is fixed IP, select ‘LAN’ in the network type, and put the IP
address, Subnet Mask, Gateway, DNS1 and DNS2 assigned by the network administrator or
ISP. DNS2 is used when DNS1 does not work.
ISP. DNS2 is used when DNS1 does not work.
-
When the network environment is PPPoE and the IP address is assigned automatically, select
‘PPPoE’ in the network type. Next, fill in the ‘User Name’ and ‘Password’ fields with the
values assigned by the network service provider.
‘PPPoE’ in the network type. Next, fill in the ‘User Name’ and ‘Password’ fields with the
values assigned by the network service provider.
-
When the network environment is “automatic IP allocation by DHCP”, select ‘DHCP’ in the
network type.
network type.
# Refer to
IP-installer user’s guide
for “Clone MAC”.
# Refer to
IP-installer user’s guide
for “Host name and domain for Cable Modem”.
####
Port Change:
You can change the HTTP port, FTP port and RTSP port numbers. The RTSP port
is used to connect the “Viewer“ to the NVC100/110 ™.
Each port should have a number below # 65535.
- HTTP: default “80”
- RTSP: default “554”
#
IP Filtering
: You can restrict the access to the administrator page from IP addresses beyond a
certain IP address range.
- Restrict Administrator Access: Check this box to restrict administrative log on.
. Base IP Address: Input the IP address of the PC which is intended to be used for log on
to administrative mode.
. Mask: This is the same as a subnet mask. It is used to allow administrative logon only to
the PCs located in the same subnet as the base IP address. If you want to allow
only one PC to be accessed in administrative mode, set this value to
255.255.255.255.
only one PC to be accessed in administrative mode, set this value to
255.255.255.255.
#
E-Mail Setup
- Recv E-Mail Address: Refer to
IP-installer user’s guide
for “Recv E-Mail Address”.
- Return E-Mail Address: Refer to
IP-installer user’s guide
for “Return E-Mail Address”.
- Notify for IP Changed: If you check this, the IP address will be sent via E-mail whenever
the IP address changes. It is sent to the E-mail address set by
“Recv E-Mail Address”.
“Recv E-Mail Address”.
. Title: Is the predefined title of the e-mail message sent to users.