BMI Technologies Inc. VUI00 Manual De Usuario

DRAFT G FORCE PLUS & G FORCE PLUS RF Instruction Manual 

 

 
Doc #RF1 Rev.2 

Nov 2005 

c. Click 

the 

Add or Delete button to add or delete Vehicles until the Employees | Assign Single 

Vehicles tab shows the desired Vehicle assignments. 

5.  Update the Employee’s Operator Card if required (see CARD ASSIGNMENT). 

 
In a G FORCE PLUS RF system, data is communicated from an RF Vehicle Monitor-equipped Vehicle to 
the Fleet Manager software by way of a network of RF Transceivers.  The RF Host Transceiver is 
physically connected to the PC running the Fleet Manager software and other RF Transceivers (Zone 
Transceivers) are placed within range of the Host Transceiver.   
 
While the Fleet Manager software automatically detects the presence of the RF Transceivers once the 
Host Transceiver is connected to the PC, their identification within the software can be customized for 
display on the Fleet Status tab if desired. 
 
1. Select 

Setup | Zone Description… from the menu to open the Zone Description Entry window.  

The Zone Description defaults are “Zone # 0”, “Zone # 1”, “Zone # 2”, etc. 

 

 

 
2.  Click on the desired Description to highlight the text.   
3.  Rename the Zone Description to match the physical location of the selected Zone Transceiver.  Each 

Zone Transceiver is labeled with its factory-assigned Zone Number. 

4. Click 

the 

OK button to save the changes. 

5.  It is recommended to name the Host Transceiver (Zone # 0) as “Host”. 
6.  The new Description will be used to identify the Last Zone for each Vehicle on the Fleet Status tab.  
 

 

After Employees are entered in the Fleet Manager software, they are assigned Cards that are read by the 
Vehicle Interface of each Vehicle.  Cards are assigned to each Employee based on role.  An Employee may 
require more than one Card: 

 

 

Employees operating Vehicles for the purpose of materials handling   Operator Card