BMI Technologies Inc. VUI00 Manual De Usuario
DRAFT G FORCE PLUS & G FORCE PLUS RF Instruction Manual
Doc #RF1 Rev.2
29
Nov 2005
Click the Link To… button to open the Select Employee window.
Select an Employee from the grid.
Click the OK button to close the window.
HINT: Double-click an Employee to save a step!
Click the Program Card button. The mouse-pointer will turn into an hourglass ( ) while the details are being
written to the Card.
Click the OK button to close the window that indicates the Card has been updated.
Remove the Card from the Software Interface and give it to the Employee.
VEHICLE MONITOR
Each Vehicle that is added to the Fleet Manager software is assigned a system-defined identification number
(ID). This ID is different than the company-assigned identification number (Vehicle No). This ID uniquely
identifies the Vehicle within the system and must be programmed to the Vehicle Monitor to draw a
connection between it and its entry in the software.
In addition, settings for each Vehicle are maintained in the software. These settings determine a Vehicle’s
unique behavior and must also be programmed from the software to the Vehicle Monitor.
The Data Logger is used for both the G FORCE PLUS and G FORCE PLUS RF systems for both
programming tasks.
(ID). This ID is different than the company-assigned identification number (Vehicle No). This ID uniquely
identifies the Vehicle within the system and must be programmed to the Vehicle Monitor to draw a
connection between it and its entry in the software.
In addition, settings for each Vehicle are maintained in the software. These settings determine a Vehicle’s
unique behavior and must also be programmed from the software to the Vehicle Monitor.
The Data Logger is used for both the G FORCE PLUS and G FORCE PLUS RF systems for both
programming tasks.
Initialize a Vehicle Monitor
The first time a Vehicle Monitor is installed on a Vehicle, it needs to be initialized. This is when both the
Vehicle ID and settings from the software are programmed.
The Data Logger can initialize up to 9 (nine) Vehicle Monitors at a time; it has 9 (nine) memory slots for
Vehicle IDs and 9 (nine) memory slots for Vehicle settings.
1. Get the Vehicle ID for the selected Vehicle.
a. Press
Enter to start the Data Logger.
b. Press
2 when the LCD displays “Action?(1-9)”. The LCD will display “Action?(1-9) Get
Vehicle ID”
c. Press
Enter to accept the choice. The LCD will display “Select Slot:”
d. Press
1 to select slot #1. The LCD will display “Select Slot: 1 Free”
e. Press
Enter to accept the choice. The LCD will display “Select Slot: 1 Slot 1 Ready”
f. Present the Data Logger to the Software Interface.
g. Select the desired Vehicle from the Vehicle tab of the Fleet Manager software and click the Veh
g. Select the desired Vehicle from the Vehicle tab of the Fleet Manager software and click the Veh
ID button. The status bar at the bottom left of the window will provide progress information
(“Programming vehicle id…”).
(“Programming vehicle id…”).