BMI Technologies Inc. VUI00 Manual De Usuario

DRAFT G FORCE PLUS & G FORCE PLUS RF Instruction Manual 

 

 
Nov 2005

Doc #RF1 Rev.2 

10. Select Download | Events | Data Logger from the menu.  The status bar at the bottom left of the 

window will provide progress information. 

 

 
 
 
 

 
11. Click the OK button to confirm completion. 

 

 

 

12.  Remove the Data Logger from the Software Interface.  The LCD will display “No Events!” 
13. Click Cancel on the Data Logger.  The LCD will display “Action?(1-9)” 
 

 
In a G FORCE PLUS system, Impact Event data is written to a Supervisor Card when the Impact alarm 
condition is reset.  A Supervisor Card stores data for up to 15 Impacts.  Impact Events from the 
Supervisor Card can be downloaded to the Fleet Manager software to clear the card.  Impact Events are 
not duplicated in the software. 
 
1.  Place the Supervisor Card on the Software Interface. 
2.  Start the Fleet Manager software (optionally select the Events | Impact tab). 
3. Select 

Download | Events | Supervisor Card from the menu.  The status bar at the bottom left of the 

window will provide progress information. 
 

 
 

 
 

 
4. Click 

the 

OK button to confirm completion.