Precor PRCR0111 Manual De Usuario
30
Assembling the Atlas Treadmill
Connecting Cables (AT-1500 Display)
After the display has been seated, attach the individual
cables of the cable assembly to the appropriate circuit
connectors inside the display. Refer to the following
diagram and table to identify the cables and connectors.
cables of the cable assembly to the appropriate circuit
connectors inside the display. Refer to the following
diagram and table to identify the cables and connectors.
Caution: Many of the connectors are keyed or polarized, so
that they can be connected in only one way. However, because
some of the strip connectors are not keyed or polarized, they
can be connected in inappropriate ways.
that they can be connected in only one way. However, because
some of the strip connectors are not keyed or polarized, they
can be connected in inappropriate ways.
When attaching unkeyed, unpolarized strip connectors,
identify the shaded or striped lead on the connector and make
sure to attach it to the pin labeled as pin 1 on the circuit board.
Attaching unkeyed connectors the wrong way can cause damage
to the display, the circuitry in the base unit, or both.
identify the shaded or striped lead on the connector and make
sure to attach it to the pin labeled as pin 1 on the circuit board.
Attaching unkeyed connectors the wrong way can cause damage
to the display, the circuitry in the base unit, or both.
Figure 14: Cable connections, AT-1500 display