Cavotec Micro-control as MC-3-6TERM Manual De Usuario
Micro-control as
Operation and Maintenance Manual for MC-3-series
Page 7 of 9
MAN-05-006
Rev.
1
2.3.2 Maintenance
• The base unit does not need any maintenance, but should be inspected periodically for physical
damage and corrosion.
2.3.3 Display Codes
If the base unit does not operate correctly, check the led indication and display for messages. Use the
enclosed table for fault finding. All repairs must be carried out by a representative from Micro-control.
enclosed table for fault finding. All repairs must be carried out by a representative from Micro-control.
2.3.4 Physical Data
Physical size and weight of the housing will vary for each delivery.
Supplementary specifications are given if required.
Supplementary specifications are given if required.
2.4 Carrying Belt
A carrying belt or neck strap are available for the terminal. It should be used whenever the terminal is
being operated for your safety and comfort. Failure to use the belt or strap may cause injury as you
will not have proper control of the terminal.
being operated for your safety and comfort. Failure to use the belt or strap may cause injury as you
will not have proper control of the terminal.
2.5 Antenna
The antenna can be an internal or external type. External antenna are either mounted on the outside
of the housing or some distance away with an extension cable supplied by Micro-control as.
of the housing or some distance away with an extension cable supplied by Micro-control as.
2.5.1 Installation
The best location for the antenna is somewhere in free space. If possible mount it so that you have a
free line of sight to the operators position. Do not mount the antenna inside a metal enclosure and
take care that the antenna will not be damaged by moving machinery.
free line of sight to the operators position. Do not mount the antenna inside a metal enclosure and
take care that the antenna will not be damaged by moving machinery.
3. Warranty
All the deliveries are thoroughly tested and packed before they leave Micro-control. If the delivery is
found to be damaged when it is opened, inform the carrier immediately. Micro-control does not cover
any damages caused during transport.
found to be damaged when it is opened, inform the carrier immediately. Micro-control does not cover
any damages caused during transport.
All systems are delivered warranted against material and manufacturing faults. The warranty covers
repairs at Micro-control. Expenses for service outside Micro-control are not included.
repairs at Micro-control. Expenses for service outside Micro-control are not included.
Repairs done without authority from Micro-control may invalidate any warranty.
4. Spare Parts
Spare Parts can be ordered through your local distributor. You will need the serial number from the
system and the part number.
system and the part number.
5. Service
Service can be arranged with your local distributor. You will need the serial number from the system
and description of the service required.
and description of the service required.