TP-Link Technologies Co. Ltd. C20I Manual De Usuario

 

- 39 - 

)

 

To build a successful connection by WPS, you should also do the corresponding configuration of 
the new device for WPS function meanwhile. 

Use this method if your client device has a WPS button. 

Step 1:  Press the WPS/Reset button on the side panel of the router, as shown in Figure 4-17. 

You can also keep the default WPS status as Enabled and click the Add device button 

in  Figure 4-16. Then choose “Press the WPS button of the new device within the 

next two minutes” and click Connect, shown in Figure 4-18. 

 

Figure 4-17 

 

Figure 4-18 Add A New Device 

Step 2:  Press and hold the WPS button of the client device.   

Step 3:  The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup 

process.  

Step 4:  When the WPS LED is on, the client device has successfully connected to the router.