Gigaset Communications GmbH SX682 Manual De Usuario
16
Connecting the Gigaset SX682 WiMAX
Gigaset SX682 WiMAX / engbt / A31008-N921-R101-2x-7619 / Installation.fm / 27.3.08
Sc
hablone 2
007_
10_1
9
Connecting the Gigaset SX682 WiMAX
Connect the Gigaset SX682 WiMAX in the following order:
1. If you use the Siemens outdoor antenna, have it installed by a radio and television
1. If you use the Siemens outdoor antenna, have it installed by a radio and television
technician. Connect the antenna cable from outside to the Gigaset SX682 WiMAX.
2. Connect the PC to the Gigaset SX682 WiMAX.
3. Connect an analogue terminal (telephone, fax machine, answer machine).
4. Connect the Gigaset SX682 WiMAX to the mains power supply and switch all the
3. Connect an analogue terminal (telephone, fax machine, answer machine).
4. Connect the Gigaset SX682 WiMAX to the mains power supply and switch all the
devices on.
Connecting the Siemens outdoor antenna
Connecting the PC
ì
Plug the connector of the antenna
cable into the ANT WiMAX connector
on your Gigaset SX682 WiMAX. To
remove the antenna cable plug, push
the slider on the plug away from the
antenna socket and pull the plug out.
cable into the ANT WiMAX connector
on your Gigaset SX682 WiMAX. To
remove the antenna cable plug, push
the slider on the plug away from the
antenna socket and pull the plug out.
!
Use either the Ethernet cable that is supplied or a standard network cable
(CAT-5) to connect the device to the PC. It is not important whether the
Ethernet cable has straight or crossed wiring.
Always use a shielded Ethernet cable.
(CAT-5) to connect the device to the PC. It is not important whether the
Ethernet cable has straight or crossed wiring.
Always use a shielded Ethernet cable.