Gigaset Communications GmbH SX682 Manual De Usuario
18
Connecting the Gigaset SX682 WiMAX
Gigaset SX682 WiMAX / engbt / A31008-N921-R101-2x-7619 / Installation.fm / 27.3.08
Sc
hablone 2
007_
10_1
9
If your analogue terminal has a TAE plug, first connect this to the adapter (connect a
telephone to the F-coded socket, a fax machine or answer machine to the N-coded
socket). Then connect the adapter plug to the Phone connection on the Gigaset SX682
WiMAX.
telephone to the F-coded socket, a fax machine or answer machine to the N-coded
socket). Then connect the adapter plug to the Phone connection on the Gigaset SX682
WiMAX.
ì
If necessary connect the telephone, fax machine or answer machine to the mains
power supply.
power supply.
Switching on the devices
ì
Connect the mains adapter plug to the Gigaset SX682 WiMAX socket.
ì
Power up the PC.
ì
Connect the mains adapter to the mains power supply.
The system starts up and performs a self-test. After the self-test, the Gigaset SX682
WiMAX continually attempts to register with a WiMAX network. Registration may be
successful immediately. If not, registration will take place when the Gigaset SX682
WiMAX is being configured.
The system starts up and performs a self-test. After the self-test, the Gigaset SX682
WiMAX continually attempts to register with a WiMAX network. Registration may be
successful immediately. If not, registration will take place when the Gigaset SX682
WiMAX is being configured.
ì
Check the LEDs during startup:
LEDs during startup:
– The Power power supply LED lights up green, and the Gigaset SX682 WiMAX
LEDs during startup:
– The Power power supply LED lights up green, and the Gigaset SX682 WiMAX
starts a self-test. If the LED does not light up, check that the mains adapter is con-
nected correctly and the power socket is live.
nected correctly and the power socket is live.
– The LAN Ethernet LED is continuously lit green. If the LED does not light up,
check that the Ethernet cable is connected correctly.
– If registration with a WiMAX network has already been successful, the Online LED
lights up green. If the LED does not light up, register your Gigaset SX682 WiMAX
during configuration.
during configuration.
ì
Connect the plug on the ana-
logue terminal to the Phone
connection on the Gigaset
SX682 WiMAX.
logue terminal to the Phone
connection on the Gigaset
SX682 WiMAX.
!
Only use the Gigaset SX682 WiMAX with the mains adapter supplied.