Gigaset Communications GmbH SX682 Manual De Usuario

Gigaset SX682 WiMAX / engbt / A31008-N921-R101-2x-7619 / Restart_and_factory_reset.fm / 27.3.08

Sc

hablone 2

007_

10_1

9

ì

Briefly press the reset button (for less than 5 seconds). The configuration settings 
will remain, the Gigaset SX682 WiMAX will be restarted.

You can also restart the Gigaset SX682 WiMAX by briefly cutting the power supply.

If you no longer have access to your Gigaset SX682 WiMAX, you can also restore factory 
settings with the reset button on the back of the device. 

ì

Press and hold the reset button for more than 5 seconds. 

The 4 RSSI LEDs will begin to flash green. The configuration settings are returned to the 
factory settings and the Gigaset SX682 WiMAX is restarted. This process takes about 
25 seconds. The Gigaset SX682 WiMAX will then automatically try to set up a connec-
tion to a WiMAX network; depending on the connection quality, 0 to 4 RSSI LEDs will 
permanently light up green. 

Factory settings
After restoring the factory settings, your Gigaset SX682 WiMAX will be in its original 
condition:

The reset button is located inside the Gigaset 
SX682 WiMAX so that it cannot be pressed 
accidentally. If you need to restart or reset the 
Gigaset SX682 WiMAX, use a thin object such as 
an opened up paper clip.

!

When the factory settings are restored, all personal settings are deleted. 

Connection Wizard 

Installation must be carried out again; see "Connection 
wizard" on page 26.

Administration 

No system password is set.