OPTOELECTRONICS Co. Ltd. OPN3200N Manual De Usuario

Descargar
Página de 31
OPN-3200n 
Specifications Manual 
 
 
 
 
16 
 
 
9. Environmental Specifications 
9.1. Temperature  
Scanning performance is guaranteed when the range of ambient temperature around the scanner is 
the following values: 
 
Operating temperature 
: 0 ~ 50 
°C
 
Storage temperature 
: -20 ~ 60
°C
 
 
9.2. Humidity 
Scanning performance is guaranteed when the range of ambient humidity around the scanner is the 
following values: 
 
Operating humidity 
: 20 ~ 85% RH (no condensation, no frost) 
Storage humidity 
: 20 ~ 85% RH (no condensation, no frost) 
 
9.3. Ambient Light Immunity 
Scanning performance is guaranteed when the range of illumination on a bar code surface is 
between zero and the following values:  
 
Incandescent light 
:   10,000 lx 
Fluorescent light 
:   10,000 lx 
Sunlight 
: 100,000 lx 
 
<Conditions> 
Bar code  
: UPC (resolution 0.33 mm) specified in Section 8.1. 
Distance 
: 125 mm from the front edge of the camera module 
Angle 
: α = 0°, β =+15°, γ = 0° 
Curvature 
: R = ∞ 
Power supply voltage 
: 3.7 V 
 
* Be sure that the direct light or specular reflection from the light source does not enter the light 
receiving section of the scanner.  
 
9.4. Dust and Drip Proof 
IEC IP42 equivalent 
 
Protection against solid objects: Level 4 equivalent 
Protected against solid objects greater than 1.0 mm 
 
Protection against liquids: Level 2 (JIS IPX2) equivalent 
Protected against dripping water from the vertical when tilted up to 15° 
 
* () is JIS drip-proof type. 
 
9.5. Vibration Strength (without packing) 
There shall be no sign of malfunction after the following vibration test.
  
Vibration test:
 Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated 
velocity of 19.6m/s
2
 (2.0 G) for 30 minutes (60 minutes per cycle) in the non-operating state. Repeat 
this in each X, Y and Z direction.