Instrumentarium Dental PaloDEx Group Oy SM Manual De Usuario
2 Capturing intraoral images
200150 rev 3
Instrumentarium Dental
17
2.6
T
AKING
IMAGES
WITH
USB
CABLE
CONNECTED
NOTE!
The Windows XP operating system will open a Windows Explorer
dialogue when Sigma M is connected via USB. Close this window.
dialogue when Sigma M is connected via USB. Close this window.
1
Start CliniView software and select a patient
2
Switch on the sensor by pressing the sensor power switch.
3
Protect the sensor with a hygienic cover and place the sensor on
to the holder.
to the holder.
4
Start image capturing in CliniView by pressing
the Start intraoral image capturing button.
the Start intraoral image capturing button.
5
Position the sensor in the patient´s mouth. The
sensor unit can be either on patient’s chest or
with the magnetic mounting on the side of the x-ray unit tube
head. Position the Intraoral x-ray unit as appropriate.
sensor unit can be either on patient’s chest or
with the magnetic mounting on the side of the x-ray unit tube
head. Position the Intraoral x-ray unit as appropriate.
NOTE!
Make sure that the device status indicator illuminates
green before making the exposure.
green before making the exposure.
6
Make the exposure by pressing the exposure button of the x-ray
unit. Blinking status indicator on the device indicates image
transfer.
unit. Blinking status indicator on the device indicates image
transfer.
NOTE!
If several images are captured in series, do not switch the sensor off
between the exposures. The auto power off will turn the sensor off, if
the sensor is not used approximately in 10 minutes.
between the exposures. The auto power off will turn the sensor off, if
the sensor is not used approximately in 10 minutes.
7
After the image capturing click Abort image capturing button in
CliniView.
CliniView.
POWER
SWITCH
SWITCH
2 Capturing intraoral images
200150 rev 3
Instrumentarium Dental
17
2.6
T
AKING
IMAGES
WITH
USB
CABLE
CONNECTED
NOTE!
The Windows XP operating system will open a Windows Explorer
dialogue when Sigma M is connected via USB. Close this window.
dialogue when Sigma M is connected via USB. Close this window.
1
Start CliniView software and select a patient
2
Switch on the sensor by pressing the sensor power switch.
3
Protect the sensor with a hygienic cover and place the sensor on
to the holder.
to the holder.
4
Start image capturing in CliniView by pressing
the Start intraoral image capturing button.
the Start intraoral image capturing button.
5
Position the sensor in the patient´s mouth. The
sensor unit can be either on patient’s chest or
with the magnetic mounting on the side of the x-ray unit tube
head. Position the Intraoral x-ray unit as appropriate.
sensor unit can be either on patient’s chest or
with the magnetic mounting on the side of the x-ray unit tube
head. Position the Intraoral x-ray unit as appropriate.
NOTE!
Make sure that the device status indicator illuminates
green before making the exposure.
green before making the exposure.
6
Make the exposure by pressing the exposure button of the x-ray
unit. Blinking status indicator on the device indicates image
transfer.
unit. Blinking status indicator on the device indicates image
transfer.
NOTE!
If several images are captured in series, do not switch the sensor off
between the exposures. The auto power off will turn the sensor off, if
the sensor is not used approximately in 10 minutes.
between the exposures. The auto power off will turn the sensor off, if
the sensor is not used approximately in 10 minutes.
7
After the image capturing click Abort image capturing button in
CliniView.
CliniView.
POWER
SWITCH
SWITCH
Approved
Reviewed: Anttila Mika Johannes 02.05.07 09:54:49
Approved: Levälampi Juhani Eemeli 02.05.07 12:02:32
See the PaloDEx Group Oy PDM system to determine the status of this document. Printed out: 04.05.07 12:38:31
Approved: Levälampi Juhani Eemeli 02.05.07 12:02:32
See the PaloDEx Group Oy PDM system to determine the status of this document. Printed out: 04.05.07 12:38:31