Instrumentarium Dental PaloDEx Group Oy SM Manual De Usuario
2 Capturing intraoral images
18
Instrumentarium Dental
200150 rev 3
8
When capturing is finished switch the sensor off, remove
disposable covers and disinfect the sensor if necessary.
disposable covers and disinfect the sensor if necessary.
WARNING!
During the exposure cycle radiation the control protection guidelines
must be observed.
must be observed.
WARNING!
Minimize the number of running programs before image capturing to
ensure the necessary operating system resources for the process.
ensure the necessary operating system resources for the process.
9
Before unplugging the USB cable, click the “Unplug or eject
hardware” icon on the desktop. Choose Sigma M and then click
OK. “Safely remove hardware” icon on the toolbar, Sigma M = X-
ray device.
hardware” icon on the desktop. Choose Sigma M and then click
OK. “Safely remove hardware” icon on the toolbar, Sigma M = X-
ray device.
2.7
R
ECHARGING
THE
BATTERY
The battery is recharged with the charger supplied with the device.
More than 200 image captures can be made with a fully charged fresh
battery. Low battery status is indicated with a flashing orange LED. A
few images can still be taken to complete the patient until the orange
LED starts flashing fast. Fast flashing indicates critically low battery
and image capturing is no more recommended.
battery. Low battery status is indicated with a flashing orange LED. A
few images can still be taken to complete the patient until the orange
LED starts flashing fast. Fast flashing indicates critically low battery
and image capturing is no more recommended.
Charge the empty battery by first plugging the charger cable in to the
sensor unit, and then plugging in to the mains. Charging takes about 2
hours and it is indicated with an orange LED that switches off when
charging is complete.
sensor unit, and then plugging in to the mains. Charging takes about 2
hours and it is indicated with an orange LED that switches off when
charging is complete.
The device cannot be used when the charger is connected.
WARNING!
Charging with equipment other than the original Sigma M charger may
cause heat generation or cell leakage.
cause heat generation or cell leakage.
2 Capturing intraoral images
18
Instrumentarium Dental
200150 rev 3
8
When capturing is finished switch the sensor off, remove
disposable covers and disinfect the sensor if necessary.
disposable covers and disinfect the sensor if necessary.
WARNING!
During the exposure cycle radiation the control protection guidelines
must be observed.
must be observed.
WARNING!
Minimize the number of running programs before image capturing to
ensure the necessary operating system resources for the process.
ensure the necessary operating system resources for the process.
9
Before unplugging the USB cable, click the “Unplug or eject
hardware” icon on the desktop. Choose Sigma M and then click
OK. “Safely remove hardware” icon on the toolbar, Sigma M = X-
ray device.
hardware” icon on the desktop. Choose Sigma M and then click
OK. “Safely remove hardware” icon on the toolbar, Sigma M = X-
ray device.
2.7
R
ECHARGING
THE
BATTERY
The battery is recharged with the charger supplied with the device.
More than 200 image captures can be made with a fully charged fresh
battery. Low battery status is indicated with a flashing orange LED. A
few images can still be taken to complete the patient until the orange
LED starts flashing fast. Fast flashing indicates critically low battery
and image capturing is no more recommended.
battery. Low battery status is indicated with a flashing orange LED. A
few images can still be taken to complete the patient until the orange
LED starts flashing fast. Fast flashing indicates critically low battery
and image capturing is no more recommended.
Charge the empty battery by first plugging the charger cable in to the
sensor unit, and then plugging in to the mains. Charging takes about 2
hours and it is indicated with an orange LED that switches off when
charging is complete.
sensor unit, and then plugging in to the mains. Charging takes about 2
hours and it is indicated with an orange LED that switches off when
charging is complete.
The device cannot be used when the charger is connected.
WARNING!
Charging with equipment other than the original Sigma M charger may
cause heat generation or cell leakage.
cause heat generation or cell leakage.
Approved
Reviewed: Anttila Mika Johannes 02.05.07 09:54:49
Approved: Levälampi Juhani Eemeli 02.05.07 12:02:32
See the PaloDEx Group Oy PDM system to determine the status of this document. Printed out: 04.05.07 12:38:31
Approved: Levälampi Juhani Eemeli 02.05.07 12:02:32
See the PaloDEx Group Oy PDM system to determine the status of this document. Printed out: 04.05.07 12:38:31