Brivo Systems Inc. ACS300-1 Manual De Usuario
Brivo ACS300 Installation Manual
Page 7
© 2017 Brivo Systems LLC. All rights reserved.
Rev 1
Pre-Installation Procedures
Before you begin installing the Brivo control panel, perform the following tasks to ensure a safe, speedy,
and successful installation.
and successful installation.
Understand the function of the Brivo ACS300 control panel (A/E/S).
The ACS300-E, ACS300-A, and ACS300-S are one or two (2) reader control panels with multiple
access points. This control panel is considered a standalone system. The control board has up
to two (2) readers on-board.
access points. This control panel is considered a standalone system. The control board has up
to two (2) readers on-board.
The Brivo ACS300-E uses an on-board Ethernet interface to communicate via any TCP/IP
networking technology that can be connected through a hub, router or switch, including Wi-Fi
and satellite communications. It is an IP-enabled Access Control System that interacts with the
Brivo OnAir cloud server via the Internet application Brivo OnAir.
networking technology that can be connected through a hub, router or switch, including Wi-Fi
and satellite communications. It is an IP-enabled Access Control System that interacts with the
Brivo OnAir cloud server via the Internet application Brivo OnAir.
The Brivo ACS300-A is identical to the ACS300-E except that the ACS300-A communicates to a
Brivo OnSite Server instead of the Brivo OnAir cloud server.
Brivo OnSite Server instead of the Brivo OnAir cloud server.
The Brivo ACS300-S is identical to the ACS300-E except that the ACS300-S cannot
communicate through the web. Instead, it is programmed through an on-board interface for data
management.
communicate through the web. Instead, it is programmed through an on-board interface for data
management.
Understand Brivo ACS300 product compatibility.
The ACS300 control panel is compatible with a large number of standard reader models
including the following (UL tested for compatibility) reader models: HID600, Identiv 8110, HID
RPK40, Allegion MTK15, AWID KP-6840, and OSDP reader 921PTPTEK00385. Brivo products
are designed to accommodate the latest updates in Wiegand and OSDP using RS-485 reader
formats. The ACS300 control board is compatible with Wiegand devices that transmit up to 255-
bit data and OSDP readers using RS-485.
including the following (UL tested for compatibility) reader models: HID600, Identiv 8110, HID
RPK40, Allegion MTK15, AWID KP-6840, and OSDP reader 921PTPTEK00385. Brivo products
are designed to accommodate the latest updates in Wiegand and OSDP using RS-485 reader
formats. The ACS300 control board is compatible with Wiegand devices that transmit up to 255-
bit data and OSDP readers using RS-485.
A current list of compatible readers and keypads is maintained on Brivo’s website at
http://www.brivo.com. If you have a specific model of reader or keypad that is not listed on the
Brivo website, please contact Technical Support at 1-866-BRIVO-4-U to determine
compatibility.
http://www.brivo.com. If you have a specific model of reader or keypad that is not listed on the
Brivo website, please contact Technical Support at 1-866-BRIVO-4-U to determine
compatibility.
Verify that the client site is ready to support the installation.
1. Check with the IT department to ensure that the ACS300 version to be installed is
compatible with the company’s local area network (LAN).
a) The ACS300 is equipped with a standard RJ-45 socket that accepts a CAT5 or
CAT6 cable with an RJ-45 plug on any 10/100 Ethernet network. Physically
connecting the panel is the same as plugging any computer or other device into
the LAN.
connecting the panel is the same as plugging any computer or other device into
the LAN.
b) Refer to the Panel Networking Admin Interface Guide (or in the case of the
ACS300-S, the Brivo OnSite Administrator’s Manual) for instructions on
connecting to the LAN. The Panel Networking Admin Interface Guide (or Brivo
OnSite Administrator’s Manual) also contains a complete list of requirements
regarding TCP/IP configuration parameters and information about security
considerations.
connecting to the LAN. The Panel Networking Admin Interface Guide (or Brivo
OnSite Administrator’s Manual) also contains a complete list of requirements
regarding TCP/IP configuration parameters and information about security
considerations.
2. Download the corresponding Quick Start Guide from the Brivo website and provide it to
the Master Administrator. This document provides instructions for registering and
configuring the control panel in the appropriate application.
configuring the control panel in the appropriate application.