Corrisoft 1023018 Manual De Usuario
Page 2 of 4 Rev. 1.01 5/21/99 wc
Operating manual for Wireless Cuff .doc
Operating manual for Wireless Cuff .doc
•
Proximity - Occurs when the client, wearing the cuff, moves away from the PTU between
20 ft. outdoors or 30 ft indoors. To be detected as a cuff violation the client must outside
these limits for a minimum of for 30 minutes. This violation rearms itself if an individual
moves back inside these limits after being out for 30 minutes.
20 ft. outdoors or 30 ft indoors. To be detected as a cuff violation the client must outside
these limits for a minimum of for 30 minutes. This violation rearms itself if an individual
moves back inside these limits after being out for 30 minutes.
•
Cuff violation - Occurs when a client forcibly removes or cuts the bracelet from the
transmitter. This violation will not page again until the bracelet has been replaced and the cuff
has been rearmed (minimum of 10 seconds) with the rearming tool.
transmitter. This violation will not page again until the bracelet has been replaced and the cuff
has been rearmed (minimum of 10 seconds) with the rearming tool.
Cautions
•
After rearming is complete the client must stay within the proximity limits for 5
minutes. Premature movement outside these limits may prevent a cuff violation from
being detected.
minutes. Premature movement outside these limits may prevent a cuff violation from
being detected.
•
Metal obstructions, in the line of sight between the cuff and the PTU, such as metal
filing cabinets, walls or refrigerators can result in false proximity violations.
filing cabinets, walls or refrigerators can result in false proximity violations.
Figure 1
Transmitter
Battery
“O” ring
Screws used
to attached
battery to
transmitter
to attached
battery to
transmitter
FCC
identifier
location.