Corrisoft 1023018 Manual De Usuario

Page 3 of 4  Rev. 1.01   5/21/99 wc
Operating manual for Wireless Cuff .doc

ALIGNMENT

PIN

GROOVE

INDEX TAB

INDEX TAB

ALIGNMENT

PIN

TITLE

Figure 2 - Wireless cuff

1.  Install O-Ring over battery hub.

2.  Align the index tabs and press to mate the two sections.  DO NOT TWIST to
align the index tabs.  If the tabs are not aligned, pull the sections apart and re-
seat.  Sections WILL NOT MATE if the alignment pin is not seated in the
alignment pin groove.

3. Using a #1 phillips screwdriver,  install the four screws.

4.  Install the cuff strap.  Make sure the metal tab on the cuff strap will contact
the metal contact in the transmitter assembly and push the cuff tab into a recess
of the transmitter assembly.  Loop the strap around the arm or leg, holding the
transmitter assembly with the screws (battery section) against the arm or leg,
and snap the other end of the cuff strap into place.

O-RING

SCREW 4 EA

STRAP

ASSY