Gecko Electronics Inc. RFMT1C Manual De Usuario

 
 

 

 

 

 

 

 

 

 
 

 

 

 

 

 

 

 

 

      

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

Press and hold the Tiger Key 
button on the spa’s Main 
control panel for two (2) 
seconds to initiate 
desynchronization. 
Press any FreePad button to 
wake the FreePad.  When the 
display illuminates, press the 
Minus button on the FreePad to 
complete the process. 

ƒ  Keep batteries out of reach of children 
ƒ  Don’t mix old and new batteries, or 

batteries of different types (alkaline 
and carbon). 

ƒ  If a battery leaks, remove all 

batteries and dispose of them in 
accordance with your local laws. 
Clean the battery compartment 
thoroughly before inserting new 
batteries. Clean by following  
battery manufacturer’s 
recommendations for cleanup. Do 
not come in contact with fluid from 
the battery.  If you do,  flush skin 
with water immediately. 

ƒ  Always remove old, wornout, and 

weak batteries promptly. Dispose of 
the batteries in accordance with 
your local laws. 

ƒ  Remove batteries if your system 

controller is to be stored for longer 
than a month without being used. 

 
 

The precautions below are to prevent the 
sudden release of electrolytes, which 
these prohibited actions can cause: 
ƒ  Do not open, puncture, or mutilate 

the batteries. 

ƒ  Do not heat batteries in an attempt 

to recharge them. 

ƒ  Do not use a fire to dispose of 

batteries. 

Released battery electrolyte is corrosive, 
can cause damage to the eyes and skin, 
and may be toxic if swallowed. 

 

This product was tested and complies 
with the limits for an intentional emitter 
under Part 15 of the Federal 
Communications Commission (FCC) 
rules, and operation is subject to these 
conditions: (1) It may not cause harmful 
interference and (2) must accept any 
interference received, including 
interference that may cause undesired 
operation. 

 

FreePad Model # 9920-100168 
Interface Module # 9920-100167 
 

If you are living in the USA,  please call 
1-800-999-4688 (extention 432) 
Monday through Friday, 8a.m. to 5p.m. 
Pacific Standard Time (PST) or e-mail 

custsvc@hotspring.com

. 

 
Watkins Manufacturing Corporation 
1280 Park Center Drive 
Vista, CA 92083 
 
 

 

Welcome…………………………………………..……………… 1 
Exciting Features…………………………………………….…… 

1 

Screen Display……………………………………………….…… 

1 

Product Content………………………………………….…….. 

1 

Interface Module...……………………………………….………. 

1 

Interface Module Installation….……………………….………… 
Starting FreePad for First Time………………………………….. 

2 
2 

Battery Installation……………………………………………….. 
FreePad/IQ2020 Synchronization………………………………... 
Using the FreePad………………………………………………… 
Screen Definitions………………………………………...……… 
FreePad Overview……………………………………….……….. 
Control Screens…………………………………………………... 
Troubleshooting………………………………………………….. 
Battery Safety Precautions……………………………………….. 
Special Battery Precaution……………………………………….. 
RegulatoryInformation……………………………………………... 
Technical Support………………………………………………… 
Warranty Information…………………………………………….. 

2 
2 
3 
3 
3 
4 
4 
5 
5 
5 
5 
6 

 
 

 
 

 

 

 
 
 
This Owner’s Manual will acquaint you with the installation and operation of the 
FreePadControl System. We suggest that you take some time to carefully review all 
of this Owner’s Manual. Please keep this manual available for reference. 
If you have any questions about any aspect of your FreePad’s set-up, operation, or 
maintenance, contact your authorized Spa Dealership. They are trained 
professionals who are familiar with the product. Their expertise will facilitate the 
enjoyment of your new FreePad. 
IMPORTANT: Watkins Manufacturing Corporation reserves the right to change 
specifications or design without notification and without incurring any obligation.
 

 

 

 

5