Wistron Corporation MS2146BG Manual De Usuario
the battery.
●
Wireless Mode - Select the wireless mode (modulation type) for date rate. Default
setting: "Connect to 802.11g and 802.11b." This option uses both 11 Mbps and 54
Mbps date rate. Other options are, "Connect to 802.11g only" and "Connect to
802.11b only."
setting: "Connect to 802.11g and 802.11b." This option uses both 11 Mbps and 54
Mbps date rate. Other options are, "Connect to 802.11g only" and "Connect to
802.11b only."
●
Preamble - The preamble property allows you to select the length of the preamble
used to make a connection. Only available in the Windows Advanced dialog. See
"
used to make a connection. Only available in the Windows Advanced dialog. See
"
To access the Advanced options:
1. From your desktop, right-click My Computer and click Properties.
2. Click the Hardware tab.
3. Click the Device Manager button.
4. Double-click Network adapters.
5. Right-click the name of the installed wireless adapter in use.
6. Select the Advanced tab.
2. Click the Hardware tab.
3. Click the Device Manager button.
4. Double-click Network adapters.
5. Right-click the name of the installed wireless adapter in use.
6. Select the Advanced tab.
Changing the Preamble Length Setting
The preamble property allows you to select the length of the preamble used to make a
connection. If you have a problem connecting to an access point, please contact your
system administrator or check the preamble length setting. If it is determined that a long
preamble length is required to connect to the access point, try changing the preamble to
"Long Only," this option always uses a long preamble to connect to the access point. The
"Auto" (Default) setting option allows automatic detection of the preamble setting
received from the access point to enable the appropriate preamble option. Short
preamble is used if this option is supported, if not, long preamble is used.
connection. If you have a problem connecting to an access point, please contact your
system administrator or check the preamble length setting. If it is determined that a long
preamble length is required to connect to the access point, try changing the preamble to
"Long Only," this option always uses a long preamble to connect to the access point. The
"Auto" (Default) setting option allows automatic detection of the preamble setting
received from the access point to enable the appropriate preamble option. Short
preamble is used if this option is supported, if not, long preamble is used.
To enable "Long Only" preamble length under Windows XP and 2000:
1. Start Windows and log on with administrative privileges.
2. Right-click on My computer on your Desktop and select Properties.
3. Click the Hardware Tab and click Device Manager.
4. Click Network Adapter, locate your installed wireless adapter, right-click on the
2. Right-click on My computer on your Desktop and select Properties.
3. Click the Hardware Tab and click Device Manager.
4. Click Network Adapter, locate your installed wireless adapter, right-click on the
device and select Property.
5. Click on Advanced Tab.
6. Select Preamble.
7. Click Use default value, to uncheck the box.
6. Select Preamble.
7. Click Use default value, to uncheck the box.