RadioFrame Networks Inc MCSERIES10 Manual De Usuario

MC-Series System Installation & Testing 

RadioFrame Networks, Inc.

 

Cause:  

Configuration Customization Error 

System Reaction: 

BR Locked 

Repair Action: 

Check system configuration to make sure the proper number of 
RadioBlades is in each RBS, check that the iDEN configuration page is 
setup properly and that it matched the Site datafill. 

ID:  

0x100e 

Service: iden 

Severity: minor 

Cause:  

Loss of Signal 

System Reaction: 

SPAM Reset 

Repair Action: 

This is a result of the DSP sending incorrect data to the RadioBlade.  
Ignore if happening infrequently.  Check for intermittent cable 
connections. Possibly a result of timing problems on the BPC. 

ID:  

0x100f 

Service: iden 

Severity: minor 

Cause:  

Degraded Signal 

System Reaction: 

Reset RadioBlade 

Repair Action: 

This is a result of either an interference source or the RadioBlade is  
going out of Calibration.  Lock or swap RadioBlades with that carrier. If 
the problem follows the carrier, most likely interference. If the problem 
follows the RadioBlade, most likely out-of-cal RadioBlade. 

ID:  

0x1010 

Service: iden 

Severity: minor 

Cause:  

Timing Problem 

System Reaction: 

SPAM Reset 

Repair Action: 

After 3 attempts to re-synchronize the RadioBlade, this alarm is issued 
and the SPAM is reset.  If problem persists, replace RadioBlade or 
replace AIC.