BodyMedia Inc. 185 Manual De Usuario
BodyMedia FIT Armband BW Manual
BodyMedia FIT Armband BW Manual
7
6
Removing the Armband strap from the Armband
You will need to remove the Armband from its strap to upload data or to clean the
Armband.
You will need to remove the Armband from its strap to upload data or to clean the
Armband.
1. With the Armband logo facing upward, apply
continuous downward pressure to the right side
of the Armband until it separates from the
Armband strap.
continuous downward pressure to the right side
of the Armband until it separates from the
Armband strap.
2. To reattach to the strap, locate the USB port on the Armband, then align port
with the indentations on the left side of the strap. Apply upward pressure to the
right side of the Armband until it snaps into place.
with the indentations on the left side of the strap. Apply upward pressure to the
right side of the Armband until it snaps into place.
Armband Status Indicators
Power
When the Armband makes contact with your body, it will automatically power on.
This may take up to 10 minutes. Activation is indicated by a series of audio tones.
Please note that there is no power button on the Armband.
Power
When the Armband makes contact with your body, it will automatically power on.
This may take up to 10 minutes. Activation is indicated by a series of audio tones.
Please note that there is no power button on the Armband.
Battery
Before first use, fully charge your Armband battery by removing the Armband strap
and connecting the Armband to your computer with the included USB cable. Charg-
ing will take approximately three hours. The battery light will flash green when the
Armband is fully charged.
Before first use, fully charge your Armband battery by removing the Armband strap
and connecting the Armband to your computer with the included USB cable. Charg-
ing will take approximately three hours. The battery light will flash green when the
Armband is fully charged.
• Model AB185 will function 2-4 days before recharging is needed
To check the battery power level, remove the Armband from your arm and press the
Armband’s Status Button. The battery light will indicate the power level as:
Armband’s Status Button. The battery light will indicate the power level as:
• Green (solid) = More than 24 hours of battery life remain.
• Amber (flashing) = Less than 24 hours of battery life remain.
• Red (flashing) = Battery needs to be charged immediately and the
Armband cannot collect data. Charge the battery before continuing use.
• Amber (flashing) = Less than 24 hours of battery life remain.
• Red (flashing) = Battery needs to be charged immediately and the
Armband cannot collect data. Charge the battery before continuing use.
Memory
The Model AB185 Armband can store 14 days worth of data before needing to be
uploaded. To check the memory status, remove the Armband and press the Arm-
band’s Status Button. The memory light will indicate memory level as:
• Green (solid) = More than 24 hours of memory life remain.
• Amber (flashing) = Less than 24 hours of memory life remain.
• Red (flashing) = Memory is full and the Armband cannot collect
additional data. Connect the Armband to your computer via the USB
cable and upload data before continuing use.
The Model AB185 Armband can store 14 days worth of data before needing to be
uploaded. To check the memory status, remove the Armband and press the Arm-
band’s Status Button. The memory light will indicate memory level as:
• Green (solid) = More than 24 hours of memory life remain.
• Amber (flashing) = Less than 24 hours of memory life remain.
• Red (flashing) = Memory is full and the Armband cannot collect
additional data. Connect the Armband to your computer via the USB
cable and upload data before continuing use.
Status Button
Monitor
Status Lights
Armband strap