BodyMedia Inc. 185 Manual De Usuario
BodyMedia FIT Armband BW Manual
BodyMedia FIT Armband BW Manual
10
To ensure the Armband is working correctly, they should be cleaned regularly.
Clean the Armband daily after sweating or when it becomes noticeably moist or
dirty. Failure to keep the Armband clean, or improper cleaning, may irritate the skin
and affect the sensor performance. Do not use solvents, cleaners or other chemi-
cals to clean the Armband and do not sterilize any part. Avoid the use of chemicals
and lotions on the skin where the Armband is worn.
dirty. Failure to keep the Armband clean, or improper cleaning, may irritate the skin
and affect the sensor performance. Do not use solvents, cleaners or other chemi-
cals to clean the Armband and do not sterilize any part. Avoid the use of chemicals
and lotions on the skin where the Armband is worn.
Cleaning
To clean the Armband:
1. Gently wipe the side of the Armband that touches the skin with a soft cloth or
towel moistened with a mild soap and water.
2. Wipe with a clean damp cloth to remove any excess soap.
3. Use a dry, soft cloth or towel to completely dry before wearing it.
To clean the Armband:
1. Gently wipe the side of the Armband that touches the skin with a soft cloth or
towel moistened with a mild soap and water.
2. Wipe with a clean damp cloth to remove any excess soap.
3. Use a dry, soft cloth or towel to completely dry before wearing it.
To clean the Armband strap:
1. Hand wash with mild soap and warm water, rinse, then air dry.
2. Machine drying may affect the performance and lifespan of the strap.
1. Hand wash with mild soap and warm water, rinse, then air dry.
2. Machine drying may affect the performance and lifespan of the strap.
Disinfecting
The Armband may be disinfected occasionally by wiping with soft cloth dampened
with 70% isopropyl alcohol. Allow 5-10 minutes for drying before wearing. Always
disinfect the Armband and replace the Armband strap prior to use by others.
The Armband may be disinfected occasionally by wiping with soft cloth dampened
with 70% isopropyl alcohol. Allow 5-10 minutes for drying before wearing. Always
disinfect the Armband and replace the Armband strap prior to use by others.
Care Instructions
11
Follow operating instructions
CAUTION
Non-Ionized radiation
The Waste Electrical and Electrical Equipment Regulations indicates
separate collection for electrical and electronic equipment
Type B Applied Part
FCC Logo
Serial Number
Manufacturer
Bluetooth® Wireless Techology
Electrical Safety
Transmit Power Class 8 – Less than 10mW output power
Duty Cycle Class 4 – permitted to operate at 100% duty cycle
Receiver Class 3 – Standard reliable SRD communication media
Symbol Definitions