CDVI WIRELESS S.P.A. GDR Manual De Usuario

If the memory is full when you try to memorize one more transmitter LD flashes 3 times and the procedure ends.

Procedure
1) Press and hold the push-button P1 for 4 sec. until the 
green led LD comes ON  ( Fig. 4); the led display the current 
operating mode according to par. 4.
2) Press the transmitter button down : LD switches OFF and 
ON again, waiting for another tx to memorize;
3) If within 10 sec. no more transmitters are activated, LD 
switches OFF and the procedure is over.  

Procedure
1) Press and hold the push-button P1 for 4 sec. until the green led LD comes ON  ( Fig. 5); the led display the current operating mode 
according to par. 4.
2) Press and hold P1 for more 4 sec. : LD begins to blink fast. 
At this point you can do 2 different operations:

 

Press the button down of the transmitter to delete. LD flashes twice slow  and then begins again to blink fast for more tx to delete.  
If within 10 sec. no more transmitters are activated, LD switches OFF and the procedure is over.  

B ) ERASE ALL THE MEMORY
Press and hold P1 for more 4 sec. : LD makes 3 slow flashes then switches off and the procedure ends. 

IS-GDRUAUK Rev. 3 del 10/06/2008

Fig. 4

P1

10 Sec.

10 Sec.

Fig. 5

118 Hillside Drive 

Lewisville, TX 75057

1-866-711-0001

www.sentrygateopener.com

USAutomatic, LTD warrants this product to be free of defects in materials and 
workmanship for 2 YEAR. For a period of 2 YEAR following purchase 
USAutomatic, LTD. will repair or replace the product free of charge, including 
parts, shop labor and return shipping and handling. 

This 2 YEAR warranty does not cover the plastic case from normal wear or 
damage due to misuse of the receiver or transformer. Modifications to the 
supplied transformer will void the warranty.

To have the product sent for warranty consideration, it must be returned with 
the proof of purchase and a return authorization number. To obtain a return 
authorization number please visit 

 or call 1-888-

711-0001 for assistance.

The return authorization number must be clearly marked on the outside of the 
return package or it may not be accepted.

www.sentrygateopener.com

This device complies with 

FCC Rules . Operation is subject 

to the following two conditions:
(1) This device may not cause harmful interference, and 
(2) this device must accept interference received, including interference 
that may cause undesired operation.

Part. 15 of the